Recently, cooking has become my favorite pastime. Cooking new and interesting dishes fascinates me and allows me to relax. Think for yourself how interesting the process of transforming simple products into unusual and tasty dishes is. When the necessary products are not enough in the refrigerator, you have to improvise, you start to worry, and suddenly the dish turns out not very tasty.

It is customary to give postcards to both closest friends and relatives, as well as work colleagues. It is especially nice to give a handmade postcard. A cute card with a cat and a bouquet of flowers will be an appropriate gift for almost any holiday, starting from the birthday and ending with a housewarming party. First you need to cook everything you need: - colored pencils; - paper; - scissors; - curly scissors; - eraser; - a simple pencil; - paper intended for quilling; - double-sided tape; - tool for paper rolling; - double-sided scrapbooking paper; - glue stick.

Such a souvenir measuring 10 x 12 cm is made of fabric using the technique of primed textiles. Used flowers from foamiran. For work we take materials: - white coarse calico. - sewing machine. - scissors. - a pencil. - acrylic paints. - thin wire. - brushes for painting. A piece of corrugated green paper.

In this review, the author shows how to make a textured pimpled surface on a tree. These pimples also have a massage effect. The technology itself is quite simple, but, of course, like everything new, requires some refinement. So, first of all, cut off a piece of the board of the desired size. The author uses a squared bar.

In this review, the author shows how you can make your own case for a pendant LED lamp made of plywood 18 mm thick. This is a great solution for the garage and home workshop. The author took a 5000 K LED lamp as a light source. It is used as an alternative to fluorescent lamps.

I'll try to remove the magnet from the speaker. A speaker with a diameter of 350 mm, released in 1980 in Novosibirsk. The magnet should be powerful enough. I need magnets to place a small tool on it. The magnet is attached to the wall and the tool will always be in sight. I advise you only to place the magnets away from the vice and other places where a lot of metal dust and chips are generated when working with the grinder.

A computer usually stands on a table near a wall. Together with the computer, various little things are usually used, which it is desirable to keep within easy reach. For such trifles, I propose to build a compact roomy three-story shelf, which is convenient to hang on a wall next to a computer. For this you will need: - plywood 10 mm thick; - jigsaw; - drill, drill; - screws (screws) - 16 pieces; - dowel hook - 2 pieces; - grinding skin; - varnish; - self-adhesive film; - pencil, compass, ruler.

The industrial production of chains is carried out on automated machines, but before they appeared, the links were bent manually using a special jig. Consider how to make such a conductor to make chains at home. Materials: sheet steel 20 mm thick; smooth rod d 10mm; square rod 14x14 or 20x20 mm.

Not far off is the beginning of the next cycle season, and mentioning the proverb about a sleigh and a cart, it would be nice to prepare your "great" for him now. Not every village has a bicycle service, where "experienced" (sometimes) craftsmen, for a "symbolic" (never) fee, will do prophylaxis for your two-wheeled friend.

In this review, the author shows how you can make a simple mechanism for opening home-made sectional doors from the remote control. Using the remote control is very convenient, since there is no need to get out of the car to open or close the gate. But specifically in this case, the gates will only open automatically, and close manually - that is, mechanically.

This home-made disk and belt sander is equipped with a DC motor with a torque of 0.2 Nm. The design is made using MDF sheets. It is also possible to adjust the engine speed through the use of a control unit. The universal 2 in 1 grinding machine has a compact size, so it is ideal for use in the home workshop, in the country or in the garage.

If the shock replaceable heads on the mallet eventually become unusable, they can be easily replaced by making new ones. For this purpose, you can use rubber or fluoroplastic of the required thickness. For more jewelry work, some craftsmen make heads from pieces of leather, gluing them together. Making interchangeable heads with a hammer for a mallet will not take much time, while the tool itself after such an “update” will last a long time.