Metal and wood cutting machine: electric drill

Pin
Send
Share
Send

In this review, the author shows how to make a home-made machine for cutting metal and wood (using an electric drill as a drive).

Of course, it should be noted right away that the speed of the electric drill is insufficient for such a machine. If possible, it is better to use an asynchronous motor with a capacity of 1-2 kW.

The master makes a small table on which the machine will be located: the drive itself and the cutting disc.

The main stages of work

First, the author welds a half-inch pipe section to a metal plate. The next step is to fix the welded part on the table.

After that, the author fastens a block consisting of two bearings, a housing for them, as well as a shaft and a pulley to a metal plate.

We install this block relative to the surface strictly at an angle of 90 degrees. For fastening, bolts with nuts are used.

Next, you will need to install a homemade handle, and you need to screw the mount to the plate to fix the electric drill.

At the last stage, it remains only to make a slot in the countertop for the cutting disc, install the belt and drill, and the machine is ready.

For details on how to make a machine for cutting metal and wood from an electric drill, see the video.

Pin
Send
Share
Send

Watch the video: How use drilling machine as cutter machinewood cutting,metal cutting, metal grinding, metal polish (November 2024).