In this review, the author shows how to make an electric drive for a car jack with your own hands. Perhaps this idea is useful to someone.
It uses a car wiper motor reducer as an electric drive. To attach the engine to the body of the jack, the author uses a piece of metal strip and some other materials.
First of all, the author cuts a piece of steel strip 20 cm long. The workpiece will be used to fasten the gear motor to the car jack.
In a cut metal strip, we drill two holes, after which we fasten it to the engine housing.
After that, the author welds the free end of the strip to the car jack.
The main stages of work
Two metal strips are welded to the handle holder of the rolling jack. Between them is a piece of stud with a nut welded to it. And the pin is attached to the gear shaft.
The master uses a rechargeable battery as a power source for the electric drive. You can also connect the wiper motor gear directly to the car.
If there are any comments and suggestions for improving this design, write about it in the comments.
For details on how to make an electric drive for a car jack with your own hands, see the video on our website.
