In this review, the author shows the process of making a mini-barbecue from a freon cylinder. Additionally, the author also makes a stand for him.
To make the stand, you will need a piece of the board, which will act as the base, and round pipes.
We cut off the size of the pipe and weld them together: as a result, a stand and a horizontal stand for the cylinder are obtained. Then we fasten the rack to the wooden base.
Barbecue process
At the next stage, the author makes a marking on a freon cylinder and a grinder cuts the door.
After that, it will be necessary to weld the hinges to the cylinder, and then to the door.
Before that, the master welds two metal strips on the sides of the door itself so that it does not fall into the cylinder.
Next, inside the container, it will be necessary to weld pieces of the corner, to which the metal grate is then welded.
The grill itself consists of two halves that are connected to each other using loops. One half opens.
The final part of the work
At the end of the cylinder, you need to cut a round hole. To do this, you can use a metal crown or grinder.
The author welds a piece of pipe from a car muffler to the hole. In principle, a regular round pipe will do.
At the last stage, it remains only to clean the surface of the container and paint with spray paint.
For details on how to make a mini-barbecue on a stand with your own hands, see the video.
