Drilling a hole in a concrete ceiling with a hammer drill is not an easy job. Especially when you need to drill a lot of holes. The hands simply get tired from excessive tension. However, this problem can be solved by making a stand for the punch.
The stand itself is very simple - you can make it in an hour. At the same time, it is easy to rearrange it from one place to another, which is very convenient. In addition to the ceiling, you can also quickly drill holes in the doorways.
The first step is to cut off two pieces of the metal strip. Then, on the edges of the workpieces, it will be necessary to drill mounting holes. The length of the strips is at your discretion.
The main stages of work
At the next stage, the master cuts a piece of the profile pipe 20 * 20 mm, the field of which drills holes in it at the desired distance from each other. The strips are connected to the profile with bolts and nuts.
Next, you need to screw the free ends of the metal strips to the board. For this, you can also use bolts and nuts.
Then it remains only to fix the perforator with a drill on the profile pipe using nylon ties. And you can get to work.
The detailed process of making a drill stand for drilling holes in the ceiling is recommended to watch in the video on the website.
